How to Manually Move a Power Seat: A Complete Guide You Need to Consider
Do you need to learn how to manually move a power seat? If you are quite bewildered by this dilemma, you should check out this simple guide I made.
Being able to drive comfortably is one of the best ways to keep yourself and your vehicle safe on the road. Aside from having a reliable engine and exhaust system, the ergonomics of your car should be secured, too.
You can maneuver your vehicle well if you are sitting conveniently. If the space of the driving seat is too cramped or awkward, you could never step on those pedals correctly. It will annoy you eventually, or worse, make your driving experience a frustrating one.
You should be able to move your car in the position that you want it. Most of the modern vehicles today are using power seats. This particular technology enables you to redirect the placement of your chair in where you can maximize your hand-and-feet coordination.
But eventually, there will come a time that your power seat will fail. It could be due to a faulty switch, or it could be the entire system itself. When you are stuck in this situation, you might have to exercise your DIY skills and make things right. Trust me. There is a lot to gain if you can get this thing right.
How to Manually Move a Power Seat
As I mentioned earlier, the power seat is an essential component of your vehicle. Without this, you can never use your car to its full potential, as you would be spending more of your time cranking the seat.
An unmoving power seat maybe because of a broken power seat switch. Precisely, the latter is placed within the car and directly connected to the door panel or seat. The role of the switch is to send power to operate the motor of the chair. That allows you to chair in multiple directions conveniently.
If the switch is acting up or failing, your car seat won’t be able to do these functions. The chair might still move but in limited directions only.
Sometimes, the issue can be caused by stuck debris somewhere in the system. But this is a rare case only. Professional services are required at this point if you want to get the power seat of your car back into action.
Fortunately, you can always do a temporary measure to alleviate your misery. Just gather up all the following tools that I have listed so that we can get started.
Tools You Need
- Drill or pliers
- Scissors or knife
- Bolt cutter
- Safety glasses
If you are in possession of a unique winder (usually a factory-produced winder that comes with the vehicle), your life would be a lot easier. You just need to place the winder in the electric motor of the car seat. The electric motor should be on either the right-hand or back of the chair.
Turn the device to the left if you want to move the seat forward. Do the opposite if you’re going to push your chair backward. But if you don’t have this tool, you need to do a little bit of dirty work.
Step 1: Take Out the Car Seat
The first thing that you need to do is to remove the seat from the car. You should do this by either detaching the entire chair or by just slicing open the rear with the use of the scissors or knife.
But before doing this procedure, make sure that the engine of your vehicle is off and the batteries are all taken out. In this way, you can work safely without minding any possible injuries.
Step 2: Slicing the Spring Mesh
Next, cut the spring meshes below the car seat with the use of the bolt cutter. After this, you will be able to see the long and lengthy shafts that control the position of the chair. Take note that you should only cut the meshes. Slice and rip other parts and your car will be in serious trouble.
Step 3: Maneuvering the Shafts
Now that the shafts are already exposed, you can already work with them. Take the pliers so that you can move the pole in the desired direction that you want. Turn the shaft left if you wish to move the seat forward and right for backward placement. In my estimate, it would take around ten to fifteen turns before you can run the shaft slowly. Just continue turning the shaft until you can achieve the desired position for your car seat.
Now, make sure that you can put the shaft in the most comfortable position possible. In this way, you don’t have to do the process again. That will save you a lot of time and effort.
But of course, you will need to bring your car to your trusted mechanic for a comprehensive diagnosis. Any damaged parts of the power seat can be repaired or replaced. As I said earlier, this is just a temporary patch. You still have a professional technician fix things for you.
Step 4: Test Drive
After this, you should do a test drive. Try to feel if the position of the seat is right enough for you to drive freely. If the placement remains awkward, just repeat the process. But this time, you have to specific with the adjustments that you are going to do with the shaft. It would be too toiling for your part if you keep on repeating this patchwork.
Your vehicle is far too precious to get ignored. It is one of the most significant investments that you can make in your life. It is necessary that you can attend to its every need.
A damaged power seat is just a typical error that any modern vehicle can encounter. Although it is not a life-threatening problem, it can still cause you significant headaches. If you don’t have the time or availability to make an appointment with your mechanic, you should learn how to move a power seat manually. Through this, you will be able to hurdle the issues of discomforts while driving momentarily.
Was this article helpful? Drop any questions or suggestions in the comment section below!